Yamaha Wolverine Forum banner

Wire kit Yamaha 5KM-86171-00-00

117K views 82 replies 39 participants last post by  kdt1970  
#1 ·
Anyone use this to connect their winch, light bar, or fuse block? Rather than splicing into the factory harness to add accessories to the 12V plug, this gives you two hot wires to run relays or power accessories by simply plugging it in between the main harness and the acc. plug. I have my winch partially installed and I'm not real excited about cutting into the factory wires. (I hate chasing down electrical issues!) I haven't used one but I just ordered two so I can use one to wire the winch and fuse block on my Wolverine and the other to straighten out the rat's nest of wiring on my Grizzly.

 
Discussion starter · #12 ·
Just follow the wires coming out of the back of the 12V accessory plug (AKA cigarette lighter). You will find that the wires to the 12V port are a short little "harness" type of thing that connects to the main wire harness with exactly the same white plugs as you have on this . Unplug that connection and then insert the new connectors of the additional wire and plug it all back together. You now have two hot wires without cutting into your factory wiring. I can take pictures of mine the next time I have the front fenders up for some more wiring.
 
Discussion starter · #14 ·
Thanks guys ill be taking a look this morning once the sun comes up. I recieved a small connector of some sort with my warn winch that had no instructions involving it. Im now wondering if thats not what it is.
Did you get the Yamaha version of the Warn winch? It seems that I have heard those winches come with that wire accessory.