[Skwirl]

I wired up a few switches today. The switches are backlit from Mictunning. The male plugs and seals are pretty slick. It took me a second to figure out how the wire was supposed to be crimped on, but I figured it out. At least everything appears to be working ok. I also used 3-way barrel crimps for the ground. Pretty pleased with it all and looks halfway professional! [emoji3]

Sent from my moto e5 play using Tapatalk

Congrats on wiring it up

But,

We like pics.

 

[Skwirl]

Check to see if those plugs are all on the same fuse. If they are, you could install a larger amp fuse there. Then use a smaller amp fuse on each leg. Kinda depends on what your installing and how much amp draw.