Yamaha Wolverine Forum banner
41 - 46 of 46 Posts

·
Premium Member
Joined
·
216 Posts
If you find a website showing you that they have a brushguard available for an RMAX 1000(even E-Bay), I would shoot them an e-mail before you buy it-chances are(100% chance) that they are back-ordered. Earliest I am hearing when contacting anyone that sells them is end of August for a ship date.
 

·
Premium Member
Joined
·
216 Posts
You won't find one today from there-they only have one Yamaha front brush guard on their site at all right now.
Home Page - SuperATV
 

·
Registered
Joined
·
87 Posts
Please help! how did everyone get the four smaller bolts on? I have zero space between the holes and the headlights????
 

·
Registered
Joined
·
8 Posts
Please help! how did everyone get the four smaller bolts on? I have zero space between the holes and the headlights????
If you loosen the factory brushguard, that should allow you sufficient space to tilt it forward and allow installation of the accessory brush guard bolts.

When I did my install, I did not remove the winch.

Good luck!
 

·
Registered
Joined
·
87 Posts
If you loosen the factory brushguard, that should allow you sufficient space to tilt it forward and allow installation of the accessory brush guard bolts.

When I did my install, I did not remove the winch.

Good luck!
This is what I ended up doing, ty!
 
41 - 46 of 46 Posts
Top