Yamaha Wolverine Forum banner

wolverine and 30s

1852 Views 0 Replies 1 Participant Last post by  ford97
I am picking up a new wolverine this week when my local yamaha dealer gets a blue one in. I plan to run a 30" tire when a lift becomes available. what would be a good clutch setup? I had a 2011 grizzly 700 with 29.5 outlaws and ran 16gr overdrive weights, jbs sheave, 1mm shim, and a white secondary spring. would this setup be good for the wolverine combined with the slug kit? I ride alot of slow trails and mud mostly, with the occasional dirt road.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.