[doober]

I know its been asked more than once, but i am trying to be a bit more specific. I recently bought an F250, coming from a flat deck, so super simple to load unload. Im looking for pics of wolverines in the back of a ford pickup (i have a 19 X2) im specifically looking for back pics, do you load on the tailgate, or have some other way of doing it. I will also be towing a travel trailer, so that throws a little wrench into things. Any pics would be super helpful. Thanks

 

[therebel19]

I'd get some 2x6s that fit under the front and rear tires vs letting the tailgate hold the rear tires.

 

[Crow]

I don’t personally haul this way but here’s an option. It would allow loading and unloading without unhooking your trailer as well. I just googled truck bed UTV rack and then clicked images and literally hundreds of photos are available. This is just one that seemed cool to me but be tall and top heavy I’d imagine.

https://truck-rack.com/product/over-the-top-truck-rack-for-5th-wheel-or-gooseneck-dually/

Or this one

UTV SXS Truck Rack

Haul your SXS on a UTV Cab Over Truck Rack without the need of pulling or storing a Trailer. Made in USA. Premium quality Utility Truck Racks. Lowest prices. FREE 10" Wide Ramps Included

towsmarttrailers.com

 

[10XRing]

If the rear tires are on the tailgate, I wouldn't trust the cables that hold the gate. I would add something like this to help carry the load.

https://www.amazon.com/DG-Manufacturing-Tailgate-Support-2017-Present/dp/B07SHVF1PC/ref=sr_1_9?gclid=Cj0KCQjwn9CgBhDjARIsAD15h0Cu_4ua62nF3kawEmg5YrUPMA5AuUAh-bUBRIR4R34njJyfFpL0cFcaAlhtEALw_wcB&hvadid=580742459276&hvdev=c&hvlocphy=9009441&hvnetw=g&hvqmt=e&hvrand=17572578036390731053&hvtargid=kwd-331292675234&hydadcr=5735_13191237&keywords=tailgate+support+bars&qid=1679070039&sr=8-9&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0

 

[therebel19]

If the rear tires are on the tailgate, I wouldn't trust the cables that hold the gate. I would add something like this to help carry the load.

https://www.amazon.com/DG-Manufacturing-Tailgate-Support-2017-Present/dp/B07SHVF1PC/ref=sr_1_9?gclid=Cj0KCQjwn9CgBhDjARIsAD15h0Cu_4ua62nF3kawEmg5YrUPMA5AuUAh-bUBRIR4R34njJyfFpL0cFcaAlhtEALw_wcB&hvadid=580742459276&hvdev=c&hvlocphy=9009441&hvnetw=g&hvqmt=e&hvrand=17572578036390731053&hvtargid=kwd-331292675234&hydadcr=5735_13191237&keywords=tailgate+support+bars&qid=1679070039&sr=8-9&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0

Me neither. That is why at bare minimum I'd want 2x6s that were long enough to go under the front and rear tires. Or the link you posted.

 

[doober]

Thanks for the advice dont know how im going to do this yet, but ive got to figure it out soon.