Seems like there are always questions about how to wire aftermarket in-dash Rocker Switches. Below are some schematics for 5 pin, 7 pin, and 10 pin Rocker Switches I made for custom wiring various accessories in my 2016 Wolverine and used the same schematics for my RMax. If your wanting to use these schematics exactly as I have them drawn be sure to study all parts of the schematic (especially the part in red) so you will have a good understanding of how your accessory will work. You may want your accessory to operate differently than I have mine, so to achieve how you want your accessory to operate may require a slight modification in how you wire it.
Regular Simple Light Switch or Accessory
![Image]()
Converting a Handle Bar Winch Switch to an In-Dash Rocker Switch
![Image]()
Front & Rear Cube Lights using 1 DPDT Switch
![Image]()
Interior Floorboard & Overhead Cab Lights using 1 DPDT Switch
![Image]()
Strobe Lights that have the capability to change Light Patterns
![Image]()
Turn Signals using 1 In-Dash DPDT Switch. LED in Switch flashes with turn signals
![Image]()
Regular Simple Light Switch or Accessory
Converting a Handle Bar Winch Switch to an In-Dash Rocker Switch
Front & Rear Cube Lights using 1 DPDT Switch
Interior Floorboard & Overhead Cab Lights using 1 DPDT Switch
Strobe Lights that have the capability to change Light Patterns
Turn Signals using 1 In-Dash DPDT Switch. LED in Switch flashes with turn signals
