Yamaha Wolverine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
637 Posts
You can install by wrapping the crossing bar but I did the Fastlab drop mounts, they lower the attachment point that gets the harness closer to the recommended over the shoulder angle.

The Tusk belt extenders do not fit without modification, they're made for the YXZ. You'll need to grind down one side to get the bolt thru the hole. The material gets really thin by the mounting hole but I don't think it's a problem. You only need one set, the door side attachment does not require the extender.
 
1 - 1 of 1 Posts
Top