Yamaha Wolverine Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
501 Posts
Discussion Starter #1
Ok, I don't know if I missed a vent hose or not, but can someone confirm the number of vent hoses in A and B in the diagram that get routed? I think it's two black rubber vents on A and one clear vent hose on B, but I am worried I let one drop down inside and missed one. Can someone confirm? Thanks.
92725
 

·
Premium Member
Joined
·
1,922 Posts
I have a thread on here somewhere.
Some had 2 and others had 3.
I don't think we ever concluded the exact number.
 

·
Premium Member
Joined
·
1,922 Posts
Found it. Link

Looks like 3, so the 3rd should be close by if it's in a bundle like 19Wherry's
 
  • Like
Reactions: Planetcat

·
Registered
Joined
·
501 Posts
Discussion Starter #4
Found it. Link

Looks like 3, so the 3rd should be close by if it's in a bundle like 19Wherry's
That linked thread is the most hilarious thread I've read in a long time. It's actually very helpful, as I think I may have a 3rd vent hose flopping around somewhere behind the dash or in a bundle. Thanks very much for the help! I should've know that a seemingly simple topic would generate so much input. :)
 

·
Registered
Joined
·
501 Posts
Discussion Starter #6
Ok, I found the third vent hose on my 2020 X2. It’s a thicker grey colored hose fed into a hole in the metal frame cross bar just underneath the other two black rubber vent hoses. It’s a larger line and appears to go right back to the trans.
 

·
Premium Member
Joined
·
1,922 Posts
I think there is suppose to be one in the frame though.
Maybe the Canister breather hose goes into the frame.
 
  • Like
Reactions: Planetcat

·
Premium Member
Joined
·
1,922 Posts
I'm thinking the 3 should be:
  • ??
  • Differential Assembly Breather
  • Transmission Case Breather
Drivers side:
  • Radiator Fan Breather

Canister goes into the Frame.
Coolant reservoir goes into the Frame

92751


92752
 
1 - 8 of 8 Posts
Top