Yamaha Wolverine Forum banner
1 - 1 of 14 Posts

· Rock Crawler
4,169 Posts
First thing you need to do is service your secondary and put TS/slippery washers in it and you should do it before its time for your first service. Yamaha's oem grease is definitely not up to spec. You can add a 0.5-1mm shim to your primary. This will make up for the 4% loss in gearing and some of the added tire weight.
I think you meant 8% loss and actually 12% for the 4 seat since it came with 29” tires.
4% for each 1” bigger in diameter right?
  • Like
Reactions: TINKEN
1 - 1 of 14 Posts