Yamaha Wolverine Forum banner

1 - 20 of 130 Posts

·
Registered
2017 Wolverine SE
Joined
·
3,794 Posts
Well How I Pay for mine?

Hmm, through the Nose!!! Since I am Retired.

Its way too much $$$ for a get away machine IMO. My Gen 1 serves me just fine and paid for. I wouldn't gain a lot and certainly nothing thats a must have for sure.
 

·
Registered
2021 Yamaha RMAX 2 XT-R 1000
Joined
·
1,403 Posts
Retired Sheriff's Captain, Detective, & CRT, 24 years. Thought I would miss it, but I don't, especially these days. Got to help alot of people, and put some bad ones away.

IMG_20161025_090420.jpg
My truck and the SxS trailer (Polaris 4 seat)
2015 F150.JPG

NCM_4363.JPG
Inside gear
NCM_4367.JPG
Tools of the trade
NCM_4368.JPG
The wife helping me dig out on a back country ride along, don't ask...
Expedition.JPG
The unmarked Detective car, did about 12 years in investigations, ended up back as Patrol Captain to finish.
Expedition 2.JPG
Yes, those are Tiger stripes, that was our CRT uniform.
Jimbo.jpg
 

·
Registered
Joined
·
25 Posts
Federal corrections officer at a penitentiary. 25 years combined state and federal corrections, 5 to go, God-willing.
 

·
Registered
Joined
·
542 Posts
automotive assembly engineer assistant. Can't show you any photos of what i work on, but chances are my company makes parts for your car/truck/suv lol. Basically i get to see and assemble parts LONG before the public see's the new version released.

When you go to the auto show, and see brand new versions of this or that, i made that part, most of the time by hand.. Fun fact.. the current release of the dodge ram grille, fully optioned out (front camera and chrome bars) weights over 20lbs lol
 

·
Registered
Joined
·
108 Posts
Discussion Starter · #7 ·
automotive assembly engineer assistant. Can't show you any photos of what i work on, but chances are my company makes parts for your car/truck/suv lol. Basically i get to see and assemble parts LONG before the public see's the new version released.

When you go to the auto show, and see brand new versions of this or that, i made that part, most of the time by hand.. Fun fact.. the current release of the dodge ram grille, fully optioned out (front camera and chrome bars) weights over 20lbs lol
So you’re the guy I cuss at for the design of this or that? My background is heavy diesel mechanics as well as performance diesel pickups.


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
288 Posts
Engineering Tech/Facilities Maintenance Specialist
Naval Facilities Engineering Command
 

·
Registered
2021 Yamaha RMAX 2 XT-R 1000
Joined
·
1,403 Posts
Engineering Tech/Facilities Maintenance Specialist
Naval Facilities Engineering Command
Where at? I did 3 yrs. DoD Police at NAS / Pacific Missile Test Center Point Mugu in Ventura County Ca.
 

·
Registered
2017 Wolverine SE
Joined
·
3,794 Posts

·
Registered
2017 Wolverine SE
Joined
·
3,794 Posts
Ah, scared me, thats a job I could do even when retired. It would pay for the next machine eventually. Not so lucky here though but I had to check.
 

·
Registered
Joined
·
37 Posts
Journeyman Millwright, Journeyman Nuclear Power Plant Mechanic

2P-4A 177.JPG 2P-4A 185.JPG 2K-4A1.jpg
 

·
Registered
2017 Wolverine SE
Joined
·
3,794 Posts

·
Premium Member
2021 X2 XT-R 850
Joined
·
311 Posts
Electrical Engineer with 188 days left to retirement!!
Harry
 

·
Premium Member
2021 RMAX4 XTR
Joined
·
541 Posts
System Engineer...Department of Defense & Broadcast Industry
 

·
Registered
2021 Yamaha RMAX 2 XT-R 1000
Joined
·
1,403 Posts
Here's a scary thought, after seeing all this highly intelligent talent, how are all these upcoming millennials with their degrees in advanced basket weaving and socialist studies going to run this world?.......LOL.......:1zhelp: :yikes: :eek1:
 
1 - 20 of 130 Posts
Top