Yamaha Wolverine Forum banner
1 - 1 of 24 Posts

· Premium Member
2,496 Posts
Guys/Gals, many are over-thinking it.
Clean out the old with paper towels, rags or whatever.
Spray wash it with carb cleaner / break cleaner.
Scuff the face with scotch-brite, clean again with carb cleaner and re-lube.
It really is that simple.
I would recommend giving the roller channels a light coat of tinkseal using a acid brush...link , especially if you are going to just pack the outer wall.
Because this coat helps to repel dust and keep it from accumulating
Sheave Prep Coat Above
Used sheave inspection later below.
Product Automotive tire Automotive design Automotive lighting Rim
  • Like
Reactions: therebel19
1 - 1 of 24 Posts