has anybody with tracks checked there front track alignment/toe. just checked mine after the first shack down. 1 1/2" toe in stock machine setting. ...
been stuck three times with the 2008 grizzly and tracks. first time was out in the middle of the lake pulling my flop shack. i always bring a shovel...
added a 19mm socket to the tool kit to adjust track. if you ever derail one you will need it. speaking from experience back in 2008 with the grizzle...
for x2 cab owners you need to block off the inner fender well and steering area to block off the airflow coming threw. will be much better if you do....
thanks for the input. i asked the dealer and he said 3m super 77 is what they use there. i used jet set. seemed to work good we will see how long it...
i had a 2008 grizzly with tracks first time was a pita. after that once you get it down and use a creeper under the track it wasn't to bad. i pick up...
2019 wolverine X2 R-spec SE
bighorn 2.0 27 x 9 12 front 27 x 11 12 rear
yamaha full cab with wiper and washer
yamaha front brush guard
yamaha rear brush guard
yamaha cv boot guards front and rear
yamaha rock sliders
yamaha trunk box
warn 3500 lb winch, synthetic rope, aluminum hawse fairlead, and winch remote
kawell 28" led light bar
ridged industries dome light and bed light
midland micro mobile gmrs two way
wet sounds stealth 6 ultra hd sound bar
ROWE electronics AMPlink
and more
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.