winch control mount inside of cab
Close
Login to Your Account
Yamaha Wolverine Forum

winch control mount inside of cab

This is a discussion on winch control mount inside of cab within the Wolverine General Discussion forums, part of the Yamaha Wolverine Gen 1 708 cc SxS category; hello guys just wondering where everyone is mounting there winch control at inside of cab......

Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
Like Tree18Likes

Thread: winch control mount inside of cab

  1. #1
    Spectator
    Member #
    15328
    Join Date
    Jan 2019
    Posts
    1
    Member #
    15328

    winch control mount inside of cab

    hello guys just wondering where everyone is mounting there winch control at inside of cab...

  2. #2
    Couch Potato
    Member #
    15238
    Join Date
    Jan 2019
    Posts
    9
    Member #
    15238
    Liked
    9 times
    I did not use the hardwire switch provided with my Warn VRX 35-S. I put a rocker switch in 1 of the empty spaces in my 19 X2 Rspec dash.

    I installed the Warn wireless remote receiver in the glove compartment where the wired remote plug would normally go. Works great, good

    luck!

  3. #3
    Experienced Piston Yamaha's Avatar
    Member #
    14522
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    509
    Member #
    14522
    Liked
    377 times
    Quote Originally Posted by cartier4 View Post
    hello guys just wondering where everyone is mounting there winch control at inside of cab...
    Does the 700 Wolvie have the helmet and seatbelt warning light? That looks like a good spot for a winch switch.

    http://www.atvtrailrider.ca/wp-conte...lDash_CMYK.jpgName:  18_Wolverine-X4_Matte-Silver_Detail_DigitalDash_CMYK.jpg
Views: 282
Size:  747.6 KB
    Wolverine X2 R-Spec SE
    27" Big Horn 2s, SuperATV Flip Windshield, Yamaha Soft Cab, Yamaha Cargo Box, Kolpin 3500# winch w/ synthetic rope, KFI winch mount, UPI Inferno Heater, JBL PRV-175 stereo, Polk 6.5 speakers, Garmin Drive 60 with VV Mapping. Lots of other little things.

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #4
    Roosted k7iou1's Avatar
    Member #
    15174
    Join Date
    Dec 2018
    Posts
    135
    Member #
    15174
    Liked
    66 times
    Quote Originally Posted by cartier4 View Post
    hello guys just wondering where everyone is mounting there winch control at inside of cab...
    Papaskeet has a good tutorial on it. Scroll down for his post and he used the helmet/seatbelt light location.
    https://www.wolverineforums.com/foru...started-2.html
    Regards
    MORSNO and Piston Yamaha like this.
    2018 R-spec EPS

  6. #5
    Mechanic
    Member #
    11658
    Join Date
    Dec 2017
    Posts
    75
    Member #
    11658
    Liked
    26 times
    Name:  20190130_204028_1548898991220.jpg
Views: 262
Size:  2.04 MB hope you can see here

  7. #6
    Experienced Piston Yamaha's Avatar
    Member #
    14522
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    509
    Member #
    14522
    Liked
    377 times
    Quote Originally Posted by k7iou1 View Post
    Papaskeet has a good tutorial on it. Scroll down for his post and he used the helmet/seatbelt light location.
    https://www.wolverineforums.com/foru...started-2.html
    Regards
    Perfect!
    Wolverine X2 R-Spec SE
    27" Big Horn 2s, SuperATV Flip Windshield, Yamaha Soft Cab, Yamaha Cargo Box, Kolpin 3500# winch w/ synthetic rope, KFI winch mount, UPI Inferno Heater, JBL PRV-175 stereo, Polk 6.5 speakers, Garmin Drive 60 with VV Mapping. Lots of other little things.

  8. #7
    Hog Chaser
    Member #
    1857
    Join Date
    Feb 2016
    Location
    Fairbanks, AK
    Posts
    51
    Member #
    1857
    Liked
    88 times
    I mounted mine under the headlight switch area and then clipped the hand control into some broom handle clips - works slick.

    https://www.wolverineforums.com/foru...rol-mount.html
    2016 R-Spec
    HW Sheave kit, 16 gr, purple spring, slippery washers
    PCV
    AIS block off
    2" Perfex lift
    30x10-12 Blackwater Evo's on ITP wheels, 1" spacer in rear
    DIY Radiator mud guards
    DIY fender flares
    Warn 3500 winch
    HW 2R exhaust tip with silencer mod/cutout

  9. #8
    Slow Poke grizztracks's Avatar
    Member #
    15030
    Join Date
    Nov 2018
    Location
    WNY
    Posts
    31
    Member #
    15030
    Liked
    22 times
    I might have to use that location for a rocker switch. My winch rocker is installed down below in one of the blanks in my 2019 X2 but I found it clumsy to use while plowing. I've been using my handheld wired remote in my left hand while plowing which works well so I don't know if I'd move that switch up or possibly a different one. I also just ordered a wireless remote switch to install and use for plowing instead of having to pull the remote cord out from the glove box.
    Piston Yamaha likes this.
    2019 Wolverine x2 rspec
    -------------------------
    2015 Viper RTX SE
    2008 FX Nytro RTX 136"
    -------------------------
    2015 Harley Softail Deluxe
    2014 Harley Street Glide Special

  10. #9
    Experienced Piston Yamaha's Avatar
    Member #
    14522
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    509
    Member #
    14522
    Liked
    377 times
    I got a wireless remote too. It's easier to operate while wearing mittens.
    Wolverine X2 R-Spec SE
    27" Big Horn 2s, SuperATV Flip Windshield, Yamaha Soft Cab, Yamaha Cargo Box, Kolpin 3500# winch w/ synthetic rope, KFI winch mount, UPI Inferno Heater, JBL PRV-175 stereo, Polk 6.5 speakers, Garmin Drive 60 with VV Mapping. Lots of other little things.

  11. #10
    Pit Stop mtgeorge's Avatar
    Member #
    10818
    Join Date
    Oct 2017
    Posts
    89
    Member #
    10818
    Liked
    43 times
    I mounted mine under the DC plug.

    Name:  WinchAuxPlug.jpg
Views: 225
Size:  119.5 KB
    2016 Blue Wolverine R-Spec EPS
    Cree 3x3 LED Cube Lights
    Seizmik Pursuit Mirrors
    Perfex 2" Lift Kit
    KFI Winch Plate & KFI Wide Fairlead Pulley
    Terra 4500 lb Superwinch
    Hunterworks Exhaust Tip
    YXZ Steering Wheel and YXZ Driver's Seat
    Dragonfire 5 Point Harness
    Tusk Hand Holds
    Rampage LED Trail Light
    EMP CV/A-Arm Guards
    Denali Pro Series Snow Plow

Page 1 of 3 1 2 3 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. X2 soft cab or hard cab
    By Firefly in forum Introductions
    Replies: 17
    Last Post: 03-26-2019, 09:01 PM
  2. Cheap winch control mount
    By AKHUNTER in forum Wolverine General Discussion
    Replies: 10
    Last Post: 03-23-2019, 08:33 AM
  3. Control Knob's Symbols Painted
    By PapaSkeeta in forum Yamaha Wolverine Builds
    Replies: 31
    Last Post: 01-01-2019, 10:51 PM
  4. Curtis cab or defender cab
    By Loganz in forum Wolverine General Discussion
    Replies: 8
    Last Post: 11-20-2016, 07:25 AM
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.