Mods and clutching - Page 7
Close
Login to Your Account
Yamaha Wolverine Forum

Mods and clutching

This is a discussion on Mods and clutching within the X2/X4 CVT, Sheaves & Wet Clutch forums, part of the Yamaha Wolverine X2 & X4 847cc SxS category; Ok, I have gone through everything! Nothing should throw testing off. Kyle at weller went through the CPU and all is good. So starting a ...

Page 7 of 12 FirstFirst ... 5 6 7 8 9 ... LastLast
Results 61 to 70 of 115
Like Tree84Likes

Thread: Mods and clutching

  1. #61
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times
    Ok, I have gone through everything! Nothing should throw testing off. Kyle at weller went through the CPU and all is good. So starting a new round of testing going to do the 18,20,and 22 gram weights with HMF and Stock pipe. It’s raining today so testing will begin Saturday weather pen

    https://www.youtube.com/watch?v=Mcn9XoTY9_0&t=51s
    MassiveOverkill and Budro2 like this.

  2. #62
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times

  3. #63
    Super Moderator MassiveOverkill's Avatar
    Member #
    4298
    Join Date
    Aug 2016
    Location
    Custer, SD
    Posts
    1,634
    Member #
    4298
    Liked
    1251 times
    You went from glorious landscape mode back to portrait mode That sharp edge can still scalp OD weights: think of a cheese slicer. I guess we'll see after some miles what happens though. Whatever weights you decide to settle on, hopefully you'll get the newer black plastic formulation and not the old tan plastic as shown in the video.
    2018 Blue Wolverine X4
    First Wolverine X4 to break the 60 MPH barrier
    Over 6000 miles and 425 hours
    Hunterworks prototype sheave with easy cleanout port, 22 gram HV weights
    Weller Racing ECU flash
    HMF Titan Series Quiet slip-on Exhaust
    Walker Evans shocks
    Swiss-cheesed airbox lid
    NGK Laser Iridium spark plugs
    Tinkseal additives
    STI HD beadlocks wearing Tusk Terrabite 27x9x12 tires
    OEM windshield, soft cab, and roof
    OEM skid plates
    OEM rock sliders
    OEM A-arm guards
    OEM cargo box
    Check out the Yamaha X2/X4 FB group: https://www.facebook.com/groups/WolverineX2X4/

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #64
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times
    Quote Originally Posted by MassiveOverkill View Post
    You went from glorious landscape mode back to portrait mode [IMG class=inlineimg]https://www.wolverineforums.com/forum/images/smilies/tongue.png[/IMG] That sharp edge can still scalp OD weights: think of a cheese slicer. I guess we'll see after some miles what happens though. Whatever weights you decide to settle on, hopefully you'll get the newer black plastic formulation and not the old tan plastic as shown in the video.
    I finally did a video right and then forgot on the second one. 😂 Yea I took your guys advise and just took the sharpness off that edge it can’t hurt anything and will help. As far as the weights they are all freebies from JBS for testing. He has been very helpful and donating weights and paying for the shipping.
    Last edited by 19Wherry; 06-20-2019 at 01:32 PM.
    MassiveOverkill and Alex like this.

  6. #65
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times
    Well attempted to get out and test. I got one pass done. I usually do 2 and record on the 2nd. Turning around I was met with the road grater and chloride truck. So testing is done for the day. Top speed with 18 gram today was 51.9. With full shift out. The road was really loose because of the grater. So I’m sorry guys just can’t win and will try to retest on Monday.
    Attached Images Attached Images  
    MassiveOverkill likes this.

  7. #66
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times
    Ok. Weller reflash, Hmf exhaust, JBS clutch, 18gram weights, 28in tires, top speed 55.3 mph. With full shift out.

    https://www.youtube.com/watch?v=OLwDOxwbvlI

  8. #67
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times

  9. #68
    Super Moderator MassiveOverkill's Avatar
    Member #
    4298
    Join Date
    Aug 2016
    Location
    Custer, SD
    Posts
    1,634
    Member #
    4298
    Liked
    1251 times
    Quote Originally Posted by 19Wherry View Post
    Ok. Weller reflash, Hmf exhaust, JBS clutch, 18gram weights, 28in tires, top speed 55.3 mph. With full shift out.

    https://www.youtube.com/watch?v=OLwDOxwbvlI
    I still maintain something else is going on and holding you back. You should be at least hitting the low 60's with your setup with 63-65 being typical.
    Budro2 likes this.
    2018 Blue Wolverine X4
    First Wolverine X4 to break the 60 MPH barrier
    Over 6000 miles and 425 hours
    Hunterworks prototype sheave with easy cleanout port, 22 gram HV weights
    Weller Racing ECU flash
    HMF Titan Series Quiet slip-on Exhaust
    Walker Evans shocks
    Swiss-cheesed airbox lid
    NGK Laser Iridium spark plugs
    Tinkseal additives
    STI HD beadlocks wearing Tusk Terrabite 27x9x12 tires
    OEM windshield, soft cab, and roof
    OEM skid plates
    OEM rock sliders
    OEM A-arm guards
    OEM cargo box
    Check out the Yamaha X2/X4 FB group: https://www.facebook.com/groups/WolverineX2X4/

  10. #69
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times
    Ok jumped straight to 22 gram weighs as I’m waiting for the 20’s to arrive. Weller flash, JBS clutch, hmf exhaust, 22gram weights, 28 in tires. Max speed 55.0 mph

    https://www.youtube.com/watch?v=RlDn...ature=youtu.be


    https://www.youtube.com/watch?v=pyUh...ature=youtu.be
    Last edited by 19Wherry; 06-24-2019 at 01:21 PM.

  11. #70
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    268
    Member #
    15110
    Liked
    224 times

Page 7 of 12 FirstFirst ... 5 6 7 8 9 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.