Super ATV - 2" Lift Kit - Page 3
Close
Login to Your Account
Yamaha Wolverine Forum

Super ATV - 2" Lift Kit

This is a discussion on Super ATV - 2" Lift Kit within the Super ATV forums, part of the Supporting Vendors category; Dang it!!!...

Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 21 to 30 of 44
Like Tree49Likes

Thread: Super ATV - 2" Lift Kit

  1. #21
    RCF
    RCF is offline
    Sunday Driver
    Member #
    16600
    Join Date
    Nov 2019
    Location
    Katy, TX
    Posts
    46
    Member #
    16600
    Liked
    24 times
    Dang it!!!
    2019 Yamaha Wolverine X2 R-Spec, Camo
    SuperATV front flip up windshield and rear windshield
    OEM rear fender flares
    30” lightbar (VisionX)
    3500lb winch (Harbor Freight)
    2010 Yamaha Grizzly 700 FI EPS, Green
    Previous Yamaha’s - 2001 Big Bear 400 4x4, 2002 Kodiak 400, 2002 FZ1

  2. #22
    Lead Super Moderator MORSNO's Avatar
    Member #
    465
    Join Date
    Oct 2015
    Location
    Eagle River, Alaska
    Posts
    3,573
    Member #
    465
    Liked
    1692 times
    A 2" kit would outsell everything else on the market! Even on the Gen 1 Wolverines, almost everyone chose the 2" over a 3-1/2" list, as it is less strain on the axles.
    2016 Alpine White Wolverine R-Spec SE
    27" Tusk Terrabites, 2" Gorilla lift kit, Over Fenders, Warn 3500 Winch, Folding Windshield, Rear Windscreen, Accessory Bar & Gun Mount, Front & Rear Grab Bar Bumpers, Cargo Bed Box, Rear-view Mirror, RAM GPS Mount, Battery Tender Charger, Seizmik Pursuit Mirrors, Lux-Pro Dome Light, Throttle Maxx Pedal Extension, Yamaha Aluminum Front Skid Plate, TGM Off-Road/Konstruktor Doors W/White & Gray Decals

  3. #23
    Mountaineer SKELLEY521's Avatar
    Member #
    15792
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    262
    Member #
    15792
    Liked
    253 times
    My only concern would be loosing all the down travel.
    From the measurements on my X2 w/ KYB's, from natural ride height to tire lifted, I only had 2" in the rear and 2-1/2" in the front.


    Quote Originally Posted by MORSNO View Post
    A 2" kit would outsell everything else on the market! Even on the Gen 1 Wolverines, almost everyone chose the 2" over a 3-1/2" list, as it is less strain on the axles.
    2019 WOLVERINE X2 R-SPEC SE / Tactical Black
    STI HD9 Matte Black Machined Beadlock Wheels
    GBC Kanati Terra Master 28x10-14
    Warn AXON 45RC Winch w/ Synthetic Spydura Rope
    Yamaha Rear Cargo Box
    Yamaha Polycarbonate Front Windshield
    Yamaha Rock Sliders
    SuperATV’s Half Windshield
    Rogue Powersports Powerscreen mesh windshield
    Side X Side Enclosures Full Soft Cab
    Seizmik Halo-R Rearview Mirror & Pursuit Side View Mirrors
    Throttle-MAXX pedal
    Weller Racing ECU Flash, Stock Exhaust

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #24
    Lead Super Moderator MORSNO's Avatar
    Member #
    465
    Join Date
    Oct 2015
    Location
    Eagle River, Alaska
    Posts
    3,573
    Member #
    465
    Liked
    1692 times
    Quote Originally Posted by SKELLEY521 View Post
    My only concern would be loosing all the down travel.
    From the measurements on my X2 w/ KYB's, from natural ride height to tire lifted, I only had 2" in the rear and 2-1/2" in the front.
    My 2" Gorilla lift (Gen 1 Wolverine) is made from billet aluminum blocks installed between the lower a-arms and the shocks/springs, I still have plenty of down travel.
    atkbike likes this.
    2016 Alpine White Wolverine R-Spec SE
    27" Tusk Terrabites, 2" Gorilla lift kit, Over Fenders, Warn 3500 Winch, Folding Windshield, Rear Windscreen, Accessory Bar & Gun Mount, Front & Rear Grab Bar Bumpers, Cargo Bed Box, Rear-view Mirror, RAM GPS Mount, Battery Tender Charger, Seizmik Pursuit Mirrors, Lux-Pro Dome Light, Throttle Maxx Pedal Extension, Yamaha Aluminum Front Skid Plate, TGM Off-Road/Konstruktor Doors W/White & Gray Decals

  6. #25
    Mountaineer SKELLEY521's Avatar
    Member #
    15792
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    262
    Member #
    15792
    Liked
    253 times
    .
    Yeah, that would be awesome and a no brainer for sure, but I think they are talking about a spring spacer like the ones they have for the X4.

    https://www.superatv.com/yamaha-wolv...-inch-lift-kit



    Quote Originally Posted by MORSNO View Post
    My 2" Gorilla lift (Gen 1 Wolverine) is made from billet aluminum blocks installed between the lower a-arms and the shocks/springs, I still have plenty of down travel.
    2019 WOLVERINE X2 R-SPEC SE / Tactical Black
    STI HD9 Matte Black Machined Beadlock Wheels
    GBC Kanati Terra Master 28x10-14
    Warn AXON 45RC Winch w/ Synthetic Spydura Rope
    Yamaha Rear Cargo Box
    Yamaha Polycarbonate Front Windshield
    Yamaha Rock Sliders
    SuperATV’s Half Windshield
    Rogue Powersports Powerscreen mesh windshield
    Side X Side Enclosures Full Soft Cab
    Seizmik Halo-R Rearview Mirror & Pursuit Side View Mirrors
    Throttle-MAXX pedal
    Weller Racing ECU Flash, Stock Exhaust

  7. #26
    Mountaineer SKELLEY521's Avatar
    Member #
    15792
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    262
    Member #
    15792
    Liked
    253 times
    MORSNO, I snagged pics from your post and think that is definitely the way to go.
    Now to get a engineer off their ass and spec the geometry out, simple Trig, SOHCAHTOA.

    Yamaha uses different shocks and I don't know the mounting point widths of the shocks, but one could build for the widest and offer bushings for the others. Use grade 5 or 8 hardware, etc.


    Pics from your Gen1 so others know what we are talking about.
    .


    Quote Originally Posted by MORSNO View Post
    My 2" Gorilla lift (Gen 1 Wolverine) is made from billet aluminum blocks installed between the lower a-arms and the shocks/springs, I still have plenty of down travel.
    Attached Images Attached Images    
    Last edited by SKELLEY521; 01-28-2020 at 12:26 PM.
    atkbike, RCF and MORSNO like this.
    2019 WOLVERINE X2 R-SPEC SE / Tactical Black
    STI HD9 Matte Black Machined Beadlock Wheels
    GBC Kanati Terra Master 28x10-14
    Warn AXON 45RC Winch w/ Synthetic Spydura Rope
    Yamaha Rear Cargo Box
    Yamaha Polycarbonate Front Windshield
    Yamaha Rock Sliders
    SuperATV’s Half Windshield
    Rogue Powersports Powerscreen mesh windshield
    Side X Side Enclosures Full Soft Cab
    Seizmik Halo-R Rearview Mirror & Pursuit Side View Mirrors
    Throttle-MAXX pedal
    Weller Racing ECU Flash, Stock Exhaust

  8. #27
    Mountaineer SKELLEY521's Avatar
    Member #
    15792
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    262
    Member #
    15792
    Liked
    253 times
    Pics of front & rear of shock mounting on 19' X2
    Attached Images Attached Images    
    2019 WOLVERINE X2 R-SPEC SE / Tactical Black
    STI HD9 Matte Black Machined Beadlock Wheels
    GBC Kanati Terra Master 28x10-14
    Warn AXON 45RC Winch w/ Synthetic Spydura Rope
    Yamaha Rear Cargo Box
    Yamaha Polycarbonate Front Windshield
    Yamaha Rock Sliders
    SuperATV’s Half Windshield
    Rogue Powersports Powerscreen mesh windshield
    Side X Side Enclosures Full Soft Cab
    Seizmik Halo-R Rearview Mirror & Pursuit Side View Mirrors
    Throttle-MAXX pedal
    Weller Racing ECU Flash, Stock Exhaust

  9. #28
    Mountaineer SKELLEY521's Avatar
    Member #
    15792
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    262
    Member #
    15792
    Liked
    253 times
    Then again, if we can't get a engineer to spec spring spacers, then this is probably over their head.....lol
    2019 WOLVERINE X2 R-SPEC SE / Tactical Black
    STI HD9 Matte Black Machined Beadlock Wheels
    GBC Kanati Terra Master 28x10-14
    Warn AXON 45RC Winch w/ Synthetic Spydura Rope
    Yamaha Rear Cargo Box
    Yamaha Polycarbonate Front Windshield
    Yamaha Rock Sliders
    SuperATV’s Half Windshield
    Rogue Powersports Powerscreen mesh windshield
    Side X Side Enclosures Full Soft Cab
    Seizmik Halo-R Rearview Mirror & Pursuit Side View Mirrors
    Throttle-MAXX pedal
    Weller Racing ECU Flash, Stock Exhaust

  10. #29
    Super Charged Wolvie Hunter's Avatar
    Member #
    5098
    Join Date
    Oct 2016
    Location
    SE Michigan
    Posts
    933
    Member #
    5098
    Liked
    617 times
    Quote Originally Posted by MORSNO View Post
    A 2" kit would outsell everything else on the market! Even on the Gen 1 Wolverines, almost everyone chose the 2" over a 3-1/2" list, as it is less strain on the axles.
    I completely agree!!!

    Come on Super ATV, bring this to market! Please don't force us all to go somewhere else. LOL.
    RCF, MORSNO and SuperATV like this.
    Wolvie Hunter

    2016 Wolvie R-Spec X1 EPS Hunter Edition, Folding Front Windshield, Rear Window, Cargo Bed Box, YXZ Steering Wheel
    Warn-3000 Winch
    Sedona-Storm 14" Alum Wheels, Rip-Saw R/T Radial Tires 27x9-14 and 27x11-14, w/ Spare
    Assault-Center Mirror
    Seizmik-Side Mirrors
    EMP-Front & Rear Bumpers, CV Guards
    Super ATV-2" Lift Kit
    Rigidhorse-19" Tri-Row LED Light Bar
    Concours-Wolverine Switch Panel

    2019 Wolvie R-Spec X2, Folding front windshield
    Warn-3500 Winch, 72” plow

  11. #30
    Sparky Budro2's Avatar
    Member #
    15378
    Join Date
    Feb 2019
    Location
    Olathe CO
    Posts
    633
    Member #
    15378
    Liked
    581 times
    Quote Originally Posted by SKELLEY521 View Post
    Pics of front & rear of shock mounting on 19' X2
    I’ll add one thought to this equation!
    I’m not sure if Super ATV makes a high clearance A arm for the X2, or if there planning to?
    If you think that may be on your list of mods in the future then you don’t want a lift kit that works from the bottom like the Gorilla billet block!
    I have that same lift and while I think it’s a great lift and probably the best quality, it won’t allow me to install the Super ATV high clearance A arm and still use the lift unlike the Perfex lift that installs at the top of the shock!
    I’ve been considering getting the high clearance A arms for the rear but I’ll have to cut the mount off the old one and fab it into the new one somehow and it won’t be as simple as if I had a different style lift!
    SuperATV likes this.
    2016 R SPEC SE
    EMP bumpers
    Viper Elite 4000 winch
    Super ATV flip up windshield
    Sway bar delete
    Tusk visor
    Fabricated quick detach headache rack w/ optional storage rack
    Hunterworks sheeve, 16gr weights, green spring, 1mm shim, modified CVT cover
    Razorback belt temperature gauge, Blowhole CVT fan
    exhaust tip w/ stock baffle mod, PCV, ais block off plate
    28x10x14 Blackwater Evos 14x7 STI HD3 black gloss wheels,
    2" Gorilla lift- Eibach springs
    Seizmik strike mirrors

Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.