19 X2 R-Spec SE Build up
Close
Login to Your Account
Yamaha Wolverine Forum

19 X2 R-Spec SE Build up

This is a discussion on 19 X2 R-Spec SE Build up within the Yamaha Wolverine X2/X4 Builds forums, part of the Yamaha Wolverine X2 & X4 847cc SxS category; Hello all. I see quite a few threads for builds so I will try to only cover stuff unique to mine. I am OCD when ...

Results 1 to 10 of 10
Like Tree15Likes
  • 4 Post By BaneBadger
  • 7 Post By BaneBadger
  • 3 Post By VTpoolman
  • 1 Post By Zpvfb32

Thread: 19 X2 R-Spec SE Build up

  1. #1
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times

    Lightbulb 19 X2 R-Spec SE Build up

    Hello all.
    I see quite a few threads for builds so I will try to only cover stuff unique to mine. I am OCD when it comes to wiring and tend to do more than necessary.

    19Wherry did a great thread on his: https://www.wolverineforums.com/foru...-x2-build.html with the OEM instruction sheets too.

    I have added the front and rear a-arm guards, rock sliders, rear brush guard, and storage box. I borrowed my SSL speaker tube from my Kodiak until I can get a permanent solution going.

    Name:  20190508_182137.jpg
Views: 168
Size:  3.81 MB
    Name:  20190508_182225.jpg
Views: 171
Size:  3.85 MB
    Name:  20190508_181142.jpg
Views: 167
Size:  4.04 MB

    I installed the SuperATV 5k Black-Ops winch and mount 2 weeks ago. Mounted the contactor under the hood and replaced the helmet/seat-belt switch with a momentary rocker from CH4x4 (very little modification and out of the way). Remote control is wireless and mounted controller behind the firewall. On the contactor I cut half of one bolt hole off (circled yellow in pictures) and did not use. Second one drilled one new hole in plastic. Third hole was already there for the positive cable clip. Forth was already there...drain hole I think? Still leaves room for the 2 optional relays too.

    Name:  20190508_180923.jpg
Views: 156
Size:  3.85 MB
    Name:  20190508_180808.jpg
Views: 158
Size:  4.24 MB
    Name:  20190508_180818.jpg
Views: 170
Size:  3.45 MB
    Name:  Inked20190508_181854_LI.jpg
Views: 157
Size:  4.97 MB
    Name:  20190508_181042.jpg
Views: 147
Size:  3.87 MB
    Name:  20190508_180900.jpg
Views: 168
Size:  4.22 MB
    Name:  20190508_180939.jpg
Views: 162
Size:  4.53 MB

    I bought rocker switch connectors and terminals for a more plug and play option.

    Name:  20190508_181511.jpg
Views: 157
Size:  3.01 MB

    I bought terminals and boots from cycleterminal.com to tie into the the factory accessory plugs behind the firewall.

    Name:  20190508_181623.jpg
Views: 163
Size:  3.35 MB

    Installed the RAM mount for my cell phone to the grab bar like they do for that GPS system. Lost my cell once on the Kodiak, never again haha

    Name:  20190508_181001.jpg
Views: 161
Size:  3.59 MB

    I have been using the hell out of this receiver from Curt on the farm - 2 inch ball, hook clevis, and yard trailer

    Name:  20190508_181236.jpg
Views: 169
Size:  3.29 MB

    Overhead storage motorcycle bungee from harbor freight for $5.

    Name:  20190508_181026.jpg
Views: 180
Size:  3.67 MB
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  2. #2
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    I bought cheap-o led work lights from amazon and mounted to the back bars.

    Name:  20190508_181128.jpg
Views: 152
Size:  2.91 MB

    And finally working on a relay box solution for multiple light accessories. Bought a relay pack, this box with fuses, figuring out the rest still... updates to follow.

    Name:  20190508_181407.jpg
Views: 173
Size:  3.51 MB
    Name:  20190508_181339.jpg
Views: 143
Size:  3.43 MB
    Name:  20190508_181421.jpg
Views: 154
Size:  3.06 MB
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  3. #3
    Mountaineer 19Wherry's Avatar
    Member #
    15110
    Join Date
    Dec 2018
    Location
    Michigan
    Posts
    276
    Member #
    15110
    Liked
    232 times
    Nice job. I really like the relay box setup.

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #4
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    Thanks. I do a lot of night riding (normally as the point man)- will be mounting a front led bar like yours, angled front pillar lights, rock lights, and the rear pillar lights. With each coming with its own fuse and relay, I had to do something and came across the box on Amazon. Plan is to mount it to the firewall over the battery for short battery cables and easy pass thru of wires.

    The box was $10 from Mictuning - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    The relays with wires was $12 - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    I am getting the pictures together for a complete write up on the Relay box setup
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  6. #5
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    Got the Relay Box Build thread going.

    https://www.wolverineforums.com/foru...box-build.html
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  7. #6
    Supporting Member VTpoolman's Avatar
    Member #
    921
    Join Date
    Jan 2016
    Location
    vermont
    Posts
    353
    Member #
    921
    Liked
    197 times
    Amplink | Rowe Electronics
    so much easier and can program time delay off and time delay on
    2019 wolverine X2 R-spec SE
    bighorn 2.0 27 x 9 12 front 27 x 11 12 rear
    yamaha full cab with wiper and washer
    yamaha front brush guard
    yamaha rear brush guard
    yamaha cv boot guards front and rear
    yamaha rock sliders
    yamaha trunk box
    warn 3500 lb winch, synthetic rope, aluminum hawse fairlead, and winch remote
    kawell 28" led light bar
    ridged industries dome light and bed light
    midland micro mobile gmrs two way
    wet sounds stealth 6 ultra hd sound bar
    ROWE electronics AMPlink
    and more

  8. #7
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    Quote Originally Posted by VTpoolman View Post
    Amplink | Rowe Electronics
    so much easier and can program time delay off and time delay on
    That is nice, maybe a future upgrade for me... watching a video on it now. Thanks
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  9. #8
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    Lamp and Drive Switch Light Thread

    https://www.wolverineforums.com/foru...tch-light.html
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

  10. #9
    Couch Potato Zpvfb32's Avatar
    Member #
    15884
    Join Date
    May 2019
    Location
    West Virginia
    Posts
    9
    Member #
    15884
    Liked
    11 times
    Nice machine. I'm looking into the same winch as well. Any pros and cons you've come across yet? Love the cheap net.
    Nice work on all the electrical stuff, I've never had the patience to make it so neat.
    BaneBadger likes this.
    2019 Yamaha Wolverine x2 r-spec ridge red.
    Super ATV flip up windshield
    Super ATV tinted rear windshield
    Black ops 3500# synthetic winch

  11. #10
    Pavement Princess BaneBadger's Avatar
    Member #
    15798
    Join Date
    May 2019
    Location
    Mississippi
    Posts
    29
    Member #
    15798
    Liked
    42 times
    Quote Originally Posted by Zpvfb32 View Post
    Nice machine. I'm looking into the same winch as well. Any pros and cons you've come across yet? Love the cheap net.
    Nice work on all the electrical stuff, I've never had the patience to make it so neat.
    Thank you
    No real Pros and Cons when it comes to operation, haven't had to put it through the ringer yet haha. Not much help I know. I used it once as a test... intentionally bottomed out in sand with a tree nearby and it pulled easily in neutral. The wireless controller was a welcomed upgrade from the old cord. The finish is similar to role cage. The hook was gold color so I painted until I pick up a winch shackle.

    Yeah, I've learned to accept my neatness and do it organized the first time... or It'll bug me until I fix it
    2019 Wolverine X2 R-SPEC SE
    OEM Skid Plate, Guards, Sliders, Brush Guards, and Storage Box
    SuperATV 5k Black-Ops Winch -Synthetic -Wireless Remote -Winch Shackle
    SuperATV Winch Mount, SuperATV Flip Windshield
    Weller ECU Flash, HMF Titan Series Quiet Exhaust
    UNI Two Stage Filter, Custom Relay Box
    Illuminated Selector Knobs

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Winch 3,500 lb. Great Price until 3/31/19
    By PapaSkeeta in forum Gear & Accessories
    Replies: 12
    Last Post: 08-10-2019, 07:41 AM
  2. 2018/19 X2 versus the 2017 R-spec
    By TimberWoof in forum Wolverine General Discussion
    Replies: 7
    Last Post: 03-29-2019, 06:21 AM
  3. 2019 R-Spec x2 SE Build
    By Mad Dog_037 in forum Yamaha Wolverine X2/X4 Builds
    Replies: 0
    Last Post: 03-17-2019, 08:53 PM
  4. Newby just picked up 19 X2 SE blue
    By sjdevil in forum Introductions
    Replies: 3
    Last Post: 03-03-2019, 03:52 PM
  5. 2016 Wolverine SE Build
    By DMcHarley in forum Yamaha Wolverine Builds
    Replies: 35
    Last Post: 11-22-2017, 09:50 AM

Tags for this Thread

WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.