Amsoil Mudslinger
Close
Login to Your Account
Yamaha Wolverine Forum

Amsoil Mudslinger

This is a discussion on Amsoil Mudslinger within the Wolverine X2/X4 General Discussion forums, part of the Yamaha Wolverine X2 & X4 847cc SxS category; I’m sure some of you have heard of this stuff but I just was told about it this last weekend. I bought a can and ...

Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
Like Tree14Likes

Thread: Amsoil Mudslinger

  1. #1
    Supporting Member 338weatherby's Avatar
    Member #
    15652
    Join Date
    Apr 2019
    Location
    Northern MN
    Posts
    121
    Member #
    15652
    Liked
    155 times

    Amsoil Mudslinger

    I’m sure some of you have heard of this stuff but I just was told about it this last weekend. I bought a can and thought I’d give it a try. I like the idea of an easier clean up and that it is a spray on. That way you can get your inner fender wells, a Arms , springs, etc coated. I also was interested in it’s plastic UV protection and the way it’s supposed to restore the look. Anyway, I took a couple before and after pics. Not as easy to see the difference but I can tell you in person it’s very noticeable. I had some spots where the black on the over fenders and door panels looked dull. A combo of some wax that got on it and I think sitting in the sun possibly as I bought this as a holder over and I believe it sat outside some. First two pics are before. Last two after.
    Attached Images Attached Images          
    MORSNO and Budro2 like this.
    2018 Wolverine X4 SE Matte/Orange
    OEM glass windshield
    OEM rear glass
    OEM front/rear A arm guards
    OEM front bash plate
    OEM front brush guard
    4500lb Warn VRX
    EMP side mirrors
    28"x 10" x 14" Carnivores w/ MSA M39 wheels with 1-1/2" spacers in rear
    2” Super ATV lift
    HMF Titan slip on exhaust
    Weller ECU reflash
    Hunterworks sheave w/18gr weights

  2. #2
    Roosted KeithStone76's Avatar
    Member #
    14754
    Join Date
    Aug 2018
    Location
    Iowa
    Posts
    139
    Member #
    14754
    Liked
    98 times
    Looks like it works pretty well. I got wax on my hard plastic too and doesn't look the best right now. Maybe I'll give this stuff a whirl.

    Sent from my moto e5 play using Tapatalk

  3. #3
    LJ3
    LJ3 is offline
    Weekender LJ3's Avatar
    Member #
    14606
    Join Date
    Aug 2018
    Location
    Wausau Wis.
    Posts
    109
    Member #
    14606
    Liked
    73 times
    Hey 338, let us know how this stuff works!
    2016 Wolverine R spec SE
    Hunterworks sheave 16 gram weights green spring
    Dynojet Power Commander V
    AIS block off plate
    HMF Titan QS
    Superwinch Terra 45 synthetic rope
    EMP Rear window
    EMP Winch mount
    Yamaha cargo box
    28"x10"x14" Maxxis Carnivores
    MSA R-Forged F2 wheels
    YXZ SE seats
    Perfex 2" lift

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #4
    Evil Kenevil Budro2's Avatar
    Member #
    15378
    Join Date
    Feb 2019
    Location
    Olathe CO
    Posts
    428
    Member #
    15378
    Liked
    321 times
    SC1 works really well too. Don’t know about the price difference. Been awhile since I bought a can. Pretty pricey if I remember right but restores the color and easy to wash mud off after.
    TimBo likes this.
    2016 R SPEC SE
    EMP front and rear bumpers
    Viper Elite 4000 winch
    Super ATV flip up windshield
    Sway bar delete
    Tusk visor
    Fabricated quick detach headache rack w/ optional storage rack
    Hunterworks sheeve, 16gr weights, green spring, slippery washers,modified CVT cover, 1mm shim, slug kit, exhaust tip w/ stock baffle mod, pcv, ais block off plate
    28x10x14 CST Clinchers, 14x7 STI HD3 black gloss wheels, 1” rear spacers
    Trucker mud flap mod
    2" Gorilla lift
    Seizmik strike mirrors

  6. #5
    Supporting Member 338weatherby's Avatar
    Member #
    15652
    Join Date
    Apr 2019
    Location
    Northern MN
    Posts
    121
    Member #
    15652
    Liked
    155 times
    It goes on super easy and I had the whole outside sprayed in 5 minutes. I then waited about 10 minutes and wiped it down. I wiped it down again in the morning. It’s now dry and super slick. Totally restored my black plastic to a deep dark shine. I’ll report how it cleans up after I get her dirty again. So far I’m sold even if it’s just for shinning it up. $10 a can, not bad.
    2018 Wolverine X4 SE Matte/Orange
    OEM glass windshield
    OEM rear glass
    OEM front/rear A arm guards
    OEM front bash plate
    OEM front brush guard
    4500lb Warn VRX
    EMP side mirrors
    28"x 10" x 14" Carnivores w/ MSA M39 wheels with 1-1/2" spacers in rear
    2” Super ATV lift
    HMF Titan slip on exhaust
    Weller ECU reflash
    Hunterworks sheave w/18gr weights

  7. #6
    Hog Chaser DirtRider612's Avatar
    Member #
    15852
    Join Date
    May 2019
    Location
    central AL
    Posts
    66
    Member #
    15852
    Liked
    38 times
    Did it take the whole can for one application?
    2018 Wolverine X4 SE
    OEM windshield, roof, and front A-arm guards
    SuperAtv 3500 lb winch and 1.5" wheel spacers
    28x10x12 dirt commanders all around

  8. #7
    Supporting Member 338weatherby's Avatar
    Member #
    15652
    Join Date
    Apr 2019
    Location
    Northern MN
    Posts
    121
    Member #
    15652
    Liked
    155 times
    Quote Originally Posted by DirtRider612 View Post
    Did it take the whole can for one application?
    There is some left but I didn’t get everything yet. My guess is that to do everything (inner fender wells , springs, wheels, etc) you will need to cans. The one can was enough to do all the outside plastics and dash/console.


    Sent from my iPhone using Tapatalk
    DirtRider612 likes this.
    2018 Wolverine X4 SE Matte/Orange
    OEM glass windshield
    OEM rear glass
    OEM front/rear A arm guards
    OEM front bash plate
    OEM front brush guard
    4500lb Warn VRX
    EMP side mirrors
    28"x 10" x 14" Carnivores w/ MSA M39 wheels with 1-1/2" spacers in rear
    2” Super ATV lift
    HMF Titan slip on exhaust
    Weller ECU reflash
    Hunterworks sheave w/18gr weights

  9. #8
    Roosted
    Member #
    15392
    Join Date
    Feb 2019
    Location
    Shediac N.B Canada
    Posts
    133
    Member #
    15392
    Liked
    125 times
    mine is so full of woods pinstriping at this point that i doubt it would make it look like new again.
    Wolverine X4 SE | 28x10-12 studded Maxxis Bighorn 2.0 (winter) | 27x9-12/27x12-12 Maxxis Bighorn on OEM wheels (summer) | OEM heater | OEM rear storage box | OEM A-Arm guards | OEM hardcoat windshield | OEM hard roof | Boss audio head unit and speakers | 20” black oak light bar | Front and rear winch | JBS Machined Sheave with 17g OD Weight’s | assault mirrors | SxS enclosures soft cab | SuperATV Rear Windshield | Walker Evans Shocks

  10. #9
    Puddle Jumper
    Member #
    9066
    Join Date
    Jun 2017
    Posts
    188
    Member #
    9066
    Liked
    86 times
    Quote Originally Posted by Alex View Post
    mine is so full of woods pinstriping at this point that i doubt it would make it look like new again.
    If this stuff is anything like SC1 (am sure it is because it’s Amsoil) you’d be surprised. My Rspec is covered in the same “pinstriping” and SC1 does an excellent job of making it looking like new.

    Mudslinger is a few bucks cheaper than SC1. I’ll be trying it soon to compare.

    Thanks, 338weatherby.
    Budro2 and TimBo like this.

  11. #10
    Supporting Member 338weatherby's Avatar
    Member #
    15652
    Join Date
    Apr 2019
    Location
    Northern MN
    Posts
    121
    Member #
    15652
    Liked
    155 times
    Quote Originally Posted by Alex View Post
    mine is so full of woods pinstriping at this point that i doubt it would make it look like new again.
    How about it might make your machine look good from far but far from good!

    It will just brighten it up that's all.
    KeithStone76 likes this.
    2018 Wolverine X4 SE Matte/Orange
    OEM glass windshield
    OEM rear glass
    OEM front/rear A arm guards
    OEM front bash plate
    OEM front brush guard
    4500lb Warn VRX
    EMP side mirrors
    28"x 10" x 14" Carnivores w/ MSA M39 wheels with 1-1/2" spacers in rear
    2” Super ATV lift
    HMF Titan slip on exhaust
    Weller ECU reflash
    Hunterworks sheave w/18gr weights

Page 1 of 3 1 2 3 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.