Wire kit Yamaha 5KM-86171-00-00 - Page 2
Close
Login to Your Account
Yamaha Wolverine Forum

Wire kit Yamaha 5KM-86171-00-00

This is a discussion on Wire kit Yamaha 5KM-86171-00-00 within the Audio, Lighting and Electrical forums, part of the General Discussions category; Originally Posted by Abell34 anybody got a picture of this thing and where it hooks up? For picture see post no. 1 For where it ...

Page 2 of 7 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 61
Like Tree33Likes

Thread: Wire kit Yamaha 5KM-86171-00-00

  1. #11
    Supporting Member
    Member #
    241
    Join Date
    Jun 2015
    Location
    TN
    Posts
    787
    Member #
    241
    Liked
    803 times
    Quote Originally Posted by Abell34 View Post
    anybody got a picture of this thing and where it hooks up?
    For picture see post no. 1
    For where it connects read post no. 7
    2016 R Spec EPS, Realtree, 29x9x14 & 29x11x14 Tusk Warthogs on ITP SS112
    Hunterworks Sheave, Greaseless 18 gr wts (did have 16 gr.), Purple Sec. Spring, Wet Clutch Slugs
    Painted Control/Gear Symbols, Bad Dog Side Mirrors, EMP Panoramic Rear Mirror,
    Interior Overhead LED lights, Blue Floorboard LED Lights, Custom Side Rain Curtains
    Radiator Mud Guards, Yamaha Alum. Front Diff. Guard, Perfex 2" Lift, Winch,
    Grease Fitting Modification for Lower Rear A-Arm, Koso Coolant Temp. Gauge,
    RAM Mounts for GPS & 8" Tablet, Under Seat Storage Box, Folding Windshield,
    EMP Front/ Rear Bumpers, 100W 17" LED light, 18W Rear Flood LEDs 2x,
    60W Front Cubes Pillar Mounted, Great Day Gun Rack, Stebel Air Horn,
    Adjustable Driver's Seat, Turn Signals, Street Legal/TN Tag, Midland MXT115 Radio,
    Custom Bed Overhead Storage Carrier

  2. #12
    Sparky MNDirtRider's Avatar
    Member #
    8273
    Join Date
    May 2017
    Location
    Maple Plain, MN
    Posts
    624
    Member #
    8273
    Liked
    448 times
    Just follow the wires coming out of the back of the 12V accessory plug (AKA cigarette lighter). You will find that the wires to the 12V port are a short little "harness" type of thing that connects to the main wire harness with exactly the same white plugs as you have on this . Unplug that connection and then insert the new connectors of the additional wire and plug it all back together. You now have two hot wires without cutting into your factory wiring. I can take pictures of mine the next time I have the front fenders up for some more wiring.
    Wolvie Hunter likes this.
    2016 R-Spec EPS
    Superwinch Terra 4500 Synthetic
    KFI Winch Plate
    STI HD3 wheels with 27" CST Clinchers
    Super ATV Flip Windshield
    YXZ Steering Wheel
    Yamaha Rear Window
    Yamaha Accessory Mount Bar
    Sirius Pro 20" light bar
    Auxbeam a-pillar & rear work lights
    Blue Sea Fuse Block
    Rad guards
    Perfex Lift

    2012 Grizzly 700 EPS
    2006 Grizzly 660 SE
    2005 Grizzly 80

  3. #13
    Sparky
    Member #
    8129
    Join Date
    Apr 2017
    Location
    Ne ohio
    Posts
    643
    Member #
    8129
    Liked
    379 times
    Thanks guys ill be taking a look this morning once the sun comes up. I recieved a small connector of some sort with my warn winch that had no instructions involving it. Im now wondering if thats not what it is.
    2016 green R-Spec, oem folding front shield , front and rear lighting, 27x9 & 27x11 Kenda Bearclaw HTR, Warn 4500 Provantage, KFI plow set up, Custom bash plate, Hunterworks PCV and AIS blockoff, Hunterworks exhaust tip (modified with partial stock baffle)

  4. Remove Advertisements
    WolverineForums.com
    Advertisements
     

  5. #14
    Sparky MNDirtRider's Avatar
    Member #
    8273
    Join Date
    May 2017
    Location
    Maple Plain, MN
    Posts
    624
    Member #
    8273
    Liked
    448 times
    Quote Originally Posted by Abell34 View Post
    Thanks guys ill be taking a look this morning once the sun comes up. I recieved a small connector of some sort with my warn winch that had no instructions involving it. Im now wondering if thats not what it is.
    Did you get the Yamaha version of the Warn winch? It seems that I have heard those winches come with that wire accessory.
    2016 R-Spec EPS
    Superwinch Terra 4500 Synthetic
    KFI Winch Plate
    STI HD3 wheels with 27" CST Clinchers
    Super ATV Flip Windshield
    YXZ Steering Wheel
    Yamaha Rear Window
    Yamaha Accessory Mount Bar
    Sirius Pro 20" light bar
    Auxbeam a-pillar & rear work lights
    Blue Sea Fuse Block
    Rad guards
    Perfex Lift

    2012 Grizzly 700 EPS
    2006 Grizzly 660 SE
    2005 Grizzly 80

  6. #15
    Sparky
    Member #
    8129
    Join Date
    Apr 2017
    Location
    Ne ohio
    Posts
    643
    Member #
    8129
    Liked
    379 times
    no I just ordered a warn 4500 provantage. I went out to the barn and looked it over and no it is not the correct wire. I have 2 short wires loose from the rest of the assembly with no mention of them in the directions. I have no clue what they are for. Im no good at vehicle electrics so Im kind of stumped. I think I want to order one of those pdm60 module things for the accessories but even with that im unsure how to wire the switches for it. I will be ordering the correct wire this weekend I think I seen it on amazon for like 17 bucks. would be very helpful to not have to splice a wire.

  7. #16
    Mountaineer Flex's Avatar
    Member #
    7873
    Join Date
    Apr 2017
    Location
    Placer County, CA
    Posts
    301
    Member #
    7873
    Liked
    274 times
    Quote Originally Posted by MNDirtRider View Post
    Did you get the Yamaha version of the Warn winch? It seems that I have heard those winches come with that wire accessory.
    Yes, you are correct. My Warn winch kit came with that factory Yamaha connector.

  8. #17
    Lead Super Moderator MassiveOverkill's Avatar
    Member #
    4298
    Join Date
    Aug 2016
    Location
    Custer, SD
    Posts
    2,340
    Member #
    4298
    Liked
    2356 times
    I was going to start a new thread but figured it would be more appropriate to add to this one.

    All Yamaha's have a blank connector to keep dirt out of the additional accessory plug. Now if you have an older model, it may make sense to buy the splitter part but us X4 owners have plenty of plugs already (there are at least 6):



    You can take that blank plug and buy the pins necessary to convert it to a harness. The male connector (plastic part) uses female pins and the female connector uses male pins (I know pretty confusing). The blanks are FEmale, so we need male pins.

    You can get them here, which also has option for 2 different wire gauge sizes:

    Male https://www.corsa-technic.com/item.php?item_id=227 (these are what you need for the blanks already provided)

    You could also just Google Sumitomo p/n 1500-0105 (male).

    Don't forget to order seals as well: https://www.corsa-technic.com/item.php?item_id=351

    For under 10 bucks you could get the pin connectors for all your accessory plugs

    UPDATE: Received my parts from Corsa. I had ordered the wrong pins (female) and they exchanged them for the male pins as well as combined my shipping

    On the right you can see the blank plug which requires male pins:



    I ordered two wire gauge sizes:



    Simple to crimp on, make sure you bend over the tabs closest to the end as well or the pin won't engage the locking tab:



    Ready to go, I only needed the positive lead:



    If you're doing reverse lights you'll need the female sockets:

    https://www.corsa-technic.com/item.p...ategory_id=111
    Last edited by MassiveOverkill; 01-03-2019 at 04:53 PM.
    2018 Blue Wolverine X4, 124th unit built at Georgia
    First Wolverine X4 to break the 60 MPH barrier
    Over 10000 miles and 670 hours
    Hunterworks prototype sheave with easy cleanout port, 20 gram HV weights
    Dynojet Power Vision 3
    HMF Titan Series Quiet slip-on Exhaust
    Walker Evans shocks
    Swiss-cheesed airbox lid
    NGK Laser Iridium spark plugs
    Synthetic in everything with Engine/Gear butter by Hunterworks
    STI HD beadlocks wearing Tusk Terrabite 27x9x12 tires
    OEM windshield, soft cab, and roof
    OEM skid plates
    OEM rock sliders
    OEM A-arm guards
    OEM cargo box
    Check out the Yamaha X2/X4 FB group: https://www.facebook.com/groups/WolverineX2X4/

  9. #18
    Turbo Planetcat's Avatar
    Member #
    10561
    Join Date
    Oct 2017
    Location
    California
    Posts
    398
    Member #
    10561
    Liked
    298 times
    Has anyone tried connecting more than one of these connectors in series? Ive got one for my winch controller Im using and a spare I was thinking about using to power a lighted toggle switch. Shouldnt be too much load on that circuit.
    2020 X2 XT-R, 2017 Yamaha Wolverine EPS w/26" Sedona RipSaws (Sold).

  10. #19
    Lead Super Moderator MassiveOverkill's Avatar
    Member #
    4298
    Join Date
    Aug 2016
    Location
    Custer, SD
    Posts
    2,340
    Member #
    4298
    Liked
    2356 times
    Quote Originally Posted by Planetcat View Post
    Has anyone tried connecting more than one of these connectors in series? Ive got one for my winch controller Im using and a spare I was thinking about using to power a lighted toggle switch. Shouldnt be too much load on that circuit.
    They all go to the same fused source to the same battery so parallel wouldn't gain you anything and series would pop that fuse.
    2018 Blue Wolverine X4, 124th unit built at Georgia
    First Wolverine X4 to break the 60 MPH barrier
    Over 10000 miles and 670 hours
    Hunterworks prototype sheave with easy cleanout port, 20 gram HV weights
    Dynojet Power Vision 3
    HMF Titan Series Quiet slip-on Exhaust
    Walker Evans shocks
    Swiss-cheesed airbox lid
    NGK Laser Iridium spark plugs
    Synthetic in everything with Engine/Gear butter by Hunterworks
    STI HD beadlocks wearing Tusk Terrabite 27x9x12 tires
    OEM windshield, soft cab, and roof
    OEM skid plates
    OEM rock sliders
    OEM A-arm guards
    OEM cargo box
    Check out the Yamaha X2/X4 FB group: https://www.facebook.com/groups/WolverineX2X4/

  11. #20
    Moon Shiner
    Member #
    2193
    Join Date
    Mar 2016
    Posts
    157
    Member #
    2193
    Liked
    37 times
    Quote Originally Posted by Planetcat View Post
    Has anyone tried connecting more than one of these connectors in series? Ive got one for my winch controller Im using and a spare I was thinking about using to power a lighted toggle switch. Shouldnt be too much load on that circuit.
    I ran two in a series. I am using a PDM60 acc wire on it though and the other is literally just a power point to light my switches. So not much draw at all. So far so good.

Page 2 of 7 FirstFirst 1 2 3 4 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. running wire in tubes
    By Okiecat in forum Audio, Lighting and Electrical
    Replies: 8
    Last Post: 12-20-2016, 08:33 AM
  2. Replies: 2
    Last Post: 07-12-2016, 02:44 PM
  3. Rock Lights and Wire Nuts?
    By grimreefer in forum Audio, Lighting and Electrical
    Replies: 12
    Last Post: 06-28-2016, 02:51 PM
  4. Wolverine Key On Hot Wire
    By Wolfie in forum Audio, Lighting and Electrical
    Replies: 5
    Last Post: 05-26-2015, 06:01 AM
  5. Wolverine PIAA light kit from Yamaha
    By Test Master in forum Audio, Lighting and Electrical
    Replies: 0
    Last Post: 04-22-2015, 11:52 AM

Search tags for this page

2016 yamaha wolverine winch wire harness

,

5km-86171-00

,

5km-86171-00-00

,
yamaha 5km 86171-00
,

yamaha 5km-86171-00

,
yamaha 5km-86171-00-00
,
yamaha viking winch wiring
,

yamaha wolverine accessory plug

,
yamaha wolverine wiring accessories
,
yamaha wolverine wiring wench forum
,
yamaha wolverine x4 accessory plugs
,
yamaha yxz accessory power connector hood
Click on a term to search our site for related topics.
WolverineForums.com is an independent Yamaha enthusiast website. Content on WolverineForums.com is generated by its users and WolverineForums.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.